Tags
The slitting line opens and levels the coiled plate, then cuts the steel plate into required narrow strips by using disc shears
Share:
Details
Introduction
The slitting line opens and levels the coiled plate, then cuts the steel plate into required narrow strips by using disc shears, coils the narrow strips by coiling machine, and then packs the narrow coils rolled into discs.
Our slitting line has a number of technologies. The automatic centering uncoiler could ensure that the coil is automatically centered to the center of the mill, and the mill can produce smoothly; The hydraulic distributing device can put the steel bar in the correct position, so that the steel bar can smoothly enter the tensioner and separator, reduce manual intervention and improve the efficiency of the mill; The head and tail bending device can ensure that the head is clamped by the jaw and improve the reliability of the jaw; Hydraulic separate jaw can firmly clamp steel bars.
Model
| S/N | Model | Plate Thickness (mm) | Plate Width (mm) | Shear Speed (m/min) | Installed Capacity (kW) | Land Area (m2) |
| 1 | HNZJ-01 | 0.2-1.0 | 500-1250 | 80-150 | 100 | 12×30 |
| 2 | HNZJ-02 | 0.5-2 | 900-1250 | 50-100 | 150 | 12×30 |
| 3 | HNZJ-04 | 1.5-4 | 1000-1500 | 40-80 | 175 | 12×30 |
| 4 | HNZJ-06 | 2-6 | 1000-1550 | 30-60 | 200 | 12×30 |
| 5 | HNZJ-10 | 4-10 | 1000-1550 | 20-40 | 480 | 12×40 |
| 6 | HNZJ-13 | 4-13 | 1000-1550 | 20-40 | 550 | 12×40 |
| 7 | HNZJ-14 | 5-14 | 1000-1700 | 15-30 | 600 | 16×50 |
| 8 | HNZJ-16 | 6-16 | 1200-2150 | 12-25 | 700 | 16×50 |
| 9 | HNZJ-20 | 8-20 | 1200-2150 | 10-20 | 900 | 16×50 |
| 10 | HNZJ-25 | 10-25 | 1200-2150 | 10-20 | 1200 | 16×50 |
